Products Description
A frame latch mounting bracket is a precision-machined metal component made of cold-rolled steel or stainless steel. As a key component of industrial equipment connection systems, it connects the latch mechanism to the equipment frame. Its main function is to provide a stable mounting base for the frame latch, ensuring precise hole positioning and maintaining accurate alignment of the latch mechanism during opening and closing, thus improving the reliability of the entire equipment door or protective structure.
The U-shaped slots at both ends of the frame latch mounting bracket are primarily for quick engagement and positioning with the main equipment frame. The large-diameter round hole in the middle is for installing fixing bolts, while the small-diameter round hole is used for auxiliary positioning or grounding connections. Multiple hole configurations are available to accommodate different types of latch mechanisms. Precise manufacturing processes ensure that the machining tolerance of all holes is controlled within ±0.02mm. This high-precision machining process guarantees the latch's sealing and vibration resistance in the closed state, maintaining stability even after long-term use and preventing loosening or displacement. In addition, the mechanical structure of the frame latch mounting bracket has been optimized. The optimized thickness and width of the bracket ensure lightweight design while also resulting in more uniform stress distribution, solving the problem of breakage that occurs with traditional brackets during long-term use. To further improve the product's corrosion and wear resistance, the frame latch mounting bracket surface undergoes electroplating, passivation, and sandblasting. Electroplating and color passivation create a protective film thickness of 8-12μm, while sandblasting controls the roughness between Ra1.6 and 3.2, enhancing coating adhesion.
As the connecting medium between the latch and the frame, the frame latch mounting bracket achieves three-dimensional positioning of the latch mechanism through high-precision holes. During assembly, operators only need to insert the bracket into the pre-set slots and tighten the bolts to ensure that the coaxiality error between the latch and the latch is within 0.1mm, improving the smoothness of door closure. During equipment operation, external forces such as wind pressure and vibration experienced by the door are transmitted to the main frame through the bracket. The frame latch mounting bracket has a load-bearing capacity exceeding 15kN, capable of withstanding frequent opening and closing impacts and sudden external forces, ensuring the stability of the latching system under various operating conditions. Simultaneously, the frame latch mounting bracket features a long, narrow design, allowing for fine-tuning within ±3mm. This design solves the alignment problem during on-site installation and improves assembly efficiency.
The installation of the frame latch mounting bracket follows a standardized procedure to ensure accurate installation without jamming or misalignment. The installation process is as follows:
Pre-treatment stage:
Before installation, the bracket needs to be cleaned to remove oil and burrs, ensuring a tight fit;
Positioning installation:
Insert the frame latch mounting bracket into the frame slot, push it tight, and insert the positioning pin to fix the position;
Tightening operation:
Tighten the bolts in a diagonal sequence, controlling the torque between 12-15 to prevent stress concentration; Inspection and acceptance: After installation, check the opening and closing flexibility of the latch.
Hot Tags: frame latch mounting bracket, China frame latch mounting bracket manufacturers, suppliers, factory, Aluminum Protective Plate, Deep Drawn Stamping Parts, Metal Belt Clip, Precision Metal Stamping Part, Saddle for Flat Bottom Handrail, stamped parts
